Centre to centre measurement of the mounting bolt holes is 3-3/8”
9/16” and ½” ports on both sides
Four port unit meaning you can mount your lines to either side
Works for:
disc/disc
disc/drum
drum/drum
Suits most GM vehicles equipped with power brake master cylinder
Fits most aftermarket boosters including Cal Custom and MBM, as well as all original GM (same 2 and 4 bolt pattern)
Considerably lighter than O.E. cast iron master cylinder
NOTE:
When mounting any master cylinder under the floor, residual pressure valves are necessary to prevent loss of brake pressure (they are not usually required for firewall mount kits).
Raw cast iron finish with zinc top 1” bore Centre to centre measurement of the mounting bolt holes is 3-3/8” 9/16” and ½” ports on both sides Four port unit...
Chrome Aluminium O.E. GM Style Master Cylinder 1⅛” bore Centre to centre measurement of the mounting bolt holes is 3-3/8” 9/16” and ½” ports on both sides Four port unit...
Chrome Aluminium O.E. GM Style Master Cylinder 1” bore Centre to centre measurement of the mounting bolt holes is 3-3/8” 9/16” and ½” ports on both sides Four port unit...
1-1/8 inch bore Centre to centre measurement of the mounting bolt holes is 3-3/8 inch Brake ports on left hand side only – 9/16 and ½ inch Compatible with: Disc/disc...
This brake master cylinder and booster set is universal, bolting on to most street rods, hot rods and other vehicles with no problem The booster mounts with a 4 bolt...
This brake master cylinder and booster set is universal, bolting on to most street rods, hot rods and other vehicles with no problem The booster mounts with a 4 bolt...
This brake master cylinder and booster set is universal, bolting on to most street rods, hot rods and other vehicles with no problem The booster mounts with a 4 bolt...