0 item(s)
View cart
You have no items in your shopping cart.
PCV Grommet Suit Aluminium Not Steel Valve Covers W/1.25" Hole Cal Custom
Required when fitting a polished aluminium breather to a valve cover with 1.25” or 31.75mm hole. These rubber grommets are different in design for aluminium as opposed to steel valve...
$16.30
Phenolic Heat Insulator Kit suits 40 DCOE Sidedraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 40 DCOE, will also suit 38/40/42
Measurements:
ID: 40mm
Thickness: 5mm
$22.99
Phenolic Heat Insulator Kit suits 40 IDF Downdraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 40 IDF
Measurements:
ID: 40mm
Thickness: 5mm
$33.39
Phenolic Heat Insulator Kit suits 44 IDF/IDA Downdraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 44 IDF/IDA
Measurements:
ID: 44mm
Thickness: 5mm
$33.39
Phenolic Heat Insulator Kit suits 45 DCOE Sidedraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 45 DCOE
Measurements:
ID: 45mm
Thickness: 5mm
$22.99
Phenolic Heat Insulator Kit suits 48 DCOE Sidedraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 48 DCOE
Measurements:
ID: 48mm
Thickness: 5mm
$23.30
Phenolic Heat Insulator Kit suits 48 IDF/IDA Downdraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburettor
Suits 48 IDF/IDA
Measurements:
ID: 48mm
Thickness: 5mm
$21.50
Phenolic Heat Insulator Kit suits 50 DCOE Sidedraft Weber Carburettor
Phenolic insulator
Includes 2 insulators and 4 gaskets
Kit suits one carburetor
Suits 50 DCOE
Measurements:
ID: 50mm
Thickness: 5mm
$23.30
Pinion Bearing & Shim Kit to suit Ford 9 Inch
Suits Ford 9 Inch
Designed to retain your critical pinion depth settings, to ensure longevity
Includes:
Pinion bearing solid spacer
Pinion bearing shims
$48.95
Pinion Crush Sleeve to suit Ford 9 Inch
Suits Ford 9 Inch Replacement for stock style crush sleeve/collar Collapsible spacer installs on the pinion and preloads the pinion bearings Note: crush sleeves are not reusable and must be...
$20.79
Pinion Nut to suit Ford 9 Inch
Suits Ford 9 Inch
Steel pinion nut
3/4"-16 thread
Red thread locking compound pre-applied
$16.95
Pinion Shim Master Kit to suit Ford 9 Inch
Suits Ford 9 Inch
Includes:
Pinion bearing housing shims
Pinion bearing shims
Pinion crush sleeve
Pinion nut
Note: this is a shim kit only. There are no bearings or gaskets.
$51.30
Pinion Support Bolts to suit Ford 9 Inch Daytona Support to Iron Housing
Suits Ford 9 Inch
Designed to suit the Daytona style pinion support, being attached to an iron housing
$44.95
Polished Aluminium Finned Shotgun Scoop to Suit Single or Dual Carb
Finned Shotgun Scoop Polished aluminium Suits single or dual 4 barrel carburetor/s (5-1/8” neck) Supplied with two paper filters, linkage, butterflies, and carburettor mounting plates. Measurements: Length 20-1/2” Width 11-1/4”...
$315.00
Polished Aluminium Hilborn Air Scoop, Suits Dual 4 BBL, Blower
Polished cast aluminium Will fit most 4 BBL carburetors with a 5-1/8” neck including Holley, Edelbrock, Carter The unit includes 2 air cleaners, adjustable base, front mesh insert. All mounting...
$316.15
Polished Aluminium Hilborn Scoop To Suit Single Carb
Hilborn Style Polished aluminium Suits single 4 barrel carburetor Supplied with front mesh insert, air filter, mounting plate, screws. Measurements: Length 13-1/2” Width 9-1/2” Height 5-1/8” Note: Must have an...
$228.95
Polished Aluminium Horn Button suits 3 Bolt Steering Wheels
Polished 6061-T6 billet aluminium Features recessed centre with ABS plastic horn button Suits all Cal Custom & Triple A 3 bolt steering wheel adaptors Fits 3 bolt hub adaptors. This...
$62.95
Polished Aluminium Push In Breather Cap Ball Milled Valve Cover Rocker Cover
Polished aluminium finish Push-in design Twist apart style for easy cleaning Specifically designed to fit valve covers with 1.25” holes including Cal Custom, Billet Specialties, RPC etc. No PCV facility....
$53.30
Polished Aluminium Push In Breather Cap with PCV Smooth Finish Valve Cover
Polished aluminium finish
Push-in design
With PCV
Twist apart style for easy cleaning
Specifically designed to fit valve covers with 1.25” holes including Cal Custom, Billet Specialties, RPC etc.
$53.30
Polished Aluminium Shotgun Scoop to Suit Single or Dual Carb
Smooth Shotgun Scoop Polished aluminium Suits single or dual 4 barrel carburetor/s (5-1/8” neck) Supplied with two paper filters, linkage, butterflies, and carburettor mounting plates. Measurements: Length 20-1/2” Width 11-1/4”...
$315.00
